CNMG 432 Turning Inserts For Steel

About the product

ironroot  CNMG 432 Turning Inserts  are known for their 80° diamond shape and double-sided design, which provides four effective cutting edges for efficient material removal. Suitable for a variety of steel materials, including stainless steel and mild steel, these inserts are ideal for medium to coarse cutting applications. They have a positive rake angle that generates low cutting forces, which helps achieve reliable performance and extend tool life. Both sides of the insert have chipbreakers to improve chip control and chip evacuation, which are critical to maintaining machine efficiency and insert life. In addition, the inserts are typically coated with a tough CVD coating that provides an excellent balance of toughness and wear resistance for a variety of cutting conditions. Insert dimensions, such as an inscribed circle diameter of 12.7 mm (0.5") and a corner radius of 0.8 mm (0.0313"), are designed to optimize cutting performance and durability.

Material & Coating

Key Features

• Double-Sided Efficiency: CNMG ceramic inserts The 80° diamond shape and double-sided design provide 4 active cutting edges, maximizing tool utilization and cutting down on replacement costs compared to single-sided inserts.

• Low Cutting Forces: A positive rake angle (-3° to -6°) reduces lateral pressure during machining, lowering strain on both the insert and machine spindle. This not only improves stability but also extends insert life by 20–30% in medium-load operations.

• Enhanced Chip Control: Symmetrical chipbreakers on both sides—featuring curved grooves and 10° relief angles—ensure consistent chip curling and evacuation. This prevents chip jamming, a common issue when machining stainless steel, and maintains surface finish quality (Ra ≤ 1.6μm).

• Precise Dimensions: With an inscribed circle diameter of 12.7mm (0.5") and a corner radius of 0.8mm (0.0313"), the inserts are engineered for tight tolerance work (±0.02mm), ideal for shoulder turning and facing operations.

  
  

Grade：TG4105     Color：Yellow         Hardness：P15-P30    Coating：CVD

Features：CNMG ceramic inserts It uses a dual-structure alloy substrate with better toughness, coated with medium-thick MT-TiCN and thick a-AI2O3 coating. Recommended for general intermittent cutting of carbon steel and low-alloy steel.

Grade：TG4135     Color：Black        Hardness：P15-P30    Coating：CVD

Features：Dual-structure alloy substrate with better toughness, using MT-TiCN and thick a-AI2O3 coating. The coating is treated with stress balance technology, which has outstanding reliability and wear resistance. Recommended for processing in a wide range of steel applications.

Grade：TG4245     Color：Dual color        Hardness：P25-P40    Coating：CVD

Features：The strong and tough alloy substrate is coated with MT-TiCN + thick a-AI2O3 coating, which gives it excellent edge strength and resistance to plastic deformation, making it the first choice for processing under unstable working conditions.

Applications

• Mild steel: Machining structural components, bolts, and brackets.

• Stainless steel: Fabricating food processing equipment, medical tools, and chemical industry parts.

• Alloy steel: Producing automotive shafts, gears, and hydraulic components.

Compatible Machines

• CNC lathes (e.g., Haas ST-series, Mazak Quick Turn) equipped with corresponding tool holders (e.g., MTJNR, SVJCR).

• Manual lathes with tool post setups for steel turning.

• Multi-axis turning centers, supporting high-speed operations (120–200 m/min cutting speed for steel).

Lifespan

CNMG ceramic insert Under optimal conditions (correct feed rate: 0.1–0.3 mm/rev; depth of cut: 1–3 mm), each cutting edge lasts 45–60 minutes of continuous machining on mild steel. For harder materials like stainless steel, edge life averages 30–45 minutes per edge. The double-sided design extends total insert lifespan to 180–240 minutes of active use before replacement, outperforming single-edge HSS tools by 3–5 times.

About Our Company

Jinan Xinxin Trading Co., Ltd. is a company specializing in a full range of turning tools, milling tools, holemaking tools, carbide cutting tools, machine tool accessories and

 other products. At the same time, we accept non-standard product customization and provide perfect tooling solutions for the machining and manufacturing industry. 

After years of development, our company firmly believe in the concept of integrity-based, with high-quality service so that the company's products are exported to

 Europe, the Middle East, South America, Southeast Asia throughout the world's more than 40 industrialized countries and regions, won the majority of domestic

 and foreign customers to support and trust.

Jinan Xinxin Trading Co., Ltd. was founded in 2012, is an excellent comprehensive imported CNC cutting tools agents in Shandong, the company firmly believe in 

the concept of good faith, with high quality and attentive service. The company believes in the concept of good faith, with high quality and attentive service. For

 the various machining enterprises to supply the world's famous brands of imported CNC cutting tools, machining center tools.

Company Brands

Our company brand IRONROOT series products, with excellent quality and perfect service, strive to reduce the cost of using tools for you.

Main products

Our company, as an important link in the machining field, is following and driving its whole system to run. Our distribution of products has become increasingly systematized, mainly including: Sandvik Coromant sandvikcoromant, Seco, Walter, Kennametal Group Kennametal, Mitsubishi MITSUBISHI, Sumitomo Sumitomo, Kyocera Sholette Kyocera CERATIP, Toshiba, Daijie, Hitachi Tools HITACHI TOOL, ISCAR ISCAR, German cobalt collar Guehring, TEGUTEC TAEGUTEC, KORLOY KORLOY and so on.

Domestic brands: Zhuzhou Diamond Brand, Zigong Great Wall Brand, Zhuzhou Jingcheng Brand, Chengdu Yingge, Ha Yigong, Harbin Tool Factory, Southwest Tools, Chengqi Tools, Shaanxi Cemented Carbide, Zhuzhou Cemented Carbide, Guizhou Yihai, Shanghai Tool Factory and a series of domestic and foreign well-known brands of manufacturers of various types and specifications of CNC blades, CNC cutting tools, whole tools, machine-clamped blades, welded blades, toolposts, shank, holder, tungsten steel slats, bars. Tungsten steel slats and bars.

At present, our company's product range includes turning tools, milling tools, drilling tools, tooling systems, carbide cutting tools, machine tool accessories and so on.

  Our Customer Reviews

Our products are exported to various countries, including the United States, the United Kingdom, Spain, Italy, Belgium, France, Germany, etc., and are deeply loved and supported by users in these countries.CNMG ceramic insert

Thank you very much for watching

Welcome to inquire about the prices, and we will provide you with the best service.

Website: https://wwwironrootcnctools.com
Whatsapp/Mobile: +86 13969129141
Email: lronroot190@gmail.com